Nano gang box, 2 to 8 way — white plastic surface switch box with a row of openings, one for each switch-width accessory; choose the number of ways.
- Choose 2, 3, 4, 5, 6, 7 or 8 way — the number of openings in the front plate.
- Each opening takes one narrow, switch-width flush accessory of a matching range.
- Fixing slots above and below every opening.
- Front plate fixed to the box at the corner screw holes.
- Knock-out on the side for conduit or casing-capping entry.
- Fixes on the wall surface — no chasing or plastering.
- White moulded plastic, ideal for rewiring, extra points, shops and rented premises.
A gang box holds several switches on one board. This Nano gang box is a white plastic surface box whose front plate has a single row of narrow openings, so a switchboard can go up on the wall without cutting it — handy for rewiring, extra points, shops, godowns and rented homes.
"Way" is the number of openings: a 2 way box takes two accessories and an 8 way box takes eight in one long row. Count the switches, bell pushes and indicators you need, add a spare for later, and choose the size from the options.
The openings suit narrow flush switches and accessories that fix at the slots above and below each opening; try one of your accessories in an opening before buying in bulk. For modular switches, use a modular surface box instead.
Typical layouts by size
- 2 way — a light switch and a fan switch.
- 3 way — two light switches and a fan switch.
- 4 way — lights, a fan switch and an indicator for one room.
- 6 way — a bedroom or shop board with lights, fans, a bell push and an indicator.
- 8 way — a hall, shop or office board with many light and fan points.
These are examples. Each opening takes one switch-width accessory, so count yours and keep one opening spare.
Where to use it
- Rewiring and renovation without breaking walls.
- Extra switch points added after construction.
- Shops, godowns, workshops and rented homes wired in surface conduit or casing-capping.
- Concrete, tiled or panelled walls that should not be chased.
How to install
- Knock out the side entry that faces your conduit or casing-capping and hold the box level on the wall.
- Fix the box to the wall with screws and wall plugs.
- Bring the wires in, wire the switches and fix each one at its opening in the front plate.
- Screw the front plate to the box at the corners and switch on.
Electrical work should be done by a licensed electrician with the supply switched off.
Frequently asked questions
- What does "way" mean on a gang box?
- It is the number of openings in the front plate, one per switch-width accessory. A 4 way box holds four and an 8 way box holds eight.
- Which size should I buy?
- Count the switches, bell pushes and indicators on the board and add one spare. For example, a room with two lights and a fan usually needs a 3 or 4 way box.
- Will modular switches fit?
- It is not a modular box: the openings are laid out for narrow flush accessories that fix at the slots above and below each opening. For modular switches, use a modular surface box and plate.
- Surface box or concealed box — which do I need?
- A surface box like this fixes on the wall and suits wiring that runs on the wall. A concealed box goes inside the wall and is set before plastering in new construction.
- Can I use it outdoors?
- It is made for indoor walls. For open, wet or outdoor areas, use a weatherproof enclosure.
Buy Nano gang boxes online from Electric Market, Chennai. For site, contractor or bulk quantities, contact us for a quote.