Crazy round angle lamp holder — white dome-shaped wall holder with a tilted, red-ringed lamp opening and a brass bayonet sleeve for B22 pin-type bulbs.
- Round, dome-shaped angle holder with a modern look.
- Lamp opening set at an angle, so the bulb points out and down from the wall.
- Red ring around the lamp opening on a white body.
- Brass bayonet sleeve with spring-loaded contacts for B22 pin-type bulbs.
- Ventilation slots moulded into the dome.
- Round base that screws to a wall or round sheet.
- Matching Crazy batten holder available for ceiling points.
The Crazy holders are round lamp holders with a white, dome-shaped body and a red ring around the lamp opening — a neater, more modern look than a plain angle holder.
This is the angle version: fixed on a wall, it tilts the bulb out and down, so the light falls on a mirror, a staircase, a passage or a doorway instead of across the wall. Inside is a brass bayonet sleeve with spring-loaded contacts for pin-type (B22) bulbs. For ceilings, choose the matching Crazy batten holder.
Where to use it
- Mirror and dressing-table lights.
- Staircases, landings and passages.
- Bedroom and hall wall points.
- Shops and offices that want a neater wall light point.
How to install
- Switch off the lighting circuit at the MCB and check that the point is dead.
- Open the holder and bring the switched phase and the neutral wires in through the base.
- Connect them to the two terminals and screw the base to the wall so the lamp opening points where the light should fall, usually downwards.
- Close the holder and fit the bulb.
Electrical work should be done by a licensed electrician with the supply switched off. Indoor use only — not for open, wet or outdoor locations.
Frequently asked questions
- What is a Crazy angle holder?
- A round, dome-shaped wall lamp holder whose lamp opening is tilted, with a red ring around it. It does the job of a plain angle holder with a neater look.
- Crazy angle holder or Crazy batten holder?
- The angle holder tilts the bulb downwards, which suits walls, mirrors and passages. The batten holder points the bulb straight out, which suits ceilings.
- Which bulbs fit this holder?
- Pin-type bayonet (B22) bulbs — the cap used by most household LED bulbs in India. Screw-type (E27) bulbs need a screw-type holder.
- Which way up should it be fixed?
- Usually with the lamp opening pointing downwards, so the light falls on the area below and the bulb does not shine into people’s eyes.
- What are the slots in the dome for?
- They are ventilation slots that let warm air escape from around the lamp cap.
- Can I use it in a bathroom or outdoors?
- It is an open holder for indoor, dry places. In bathrooms, open verandahs and outdoor points, use an enclosed fitting made for damp or wet locations.
Buy Crazy round angle lamp holders online from Electric Market, Chennai. For site, contractor or bulk quantities, contact us for a quote.